What is pros Sens Valorant? (2023)

What is the average pro Valorant Sens?

You can not afford to miss too many shots if you can be defeated by a single bullet. This fact means that a lower eDPI to guarantee perfect aim is better. Therefore, the average Valorant pro eDPI is 280.

While a large number of pros use low a eDPI setting that ranges between 200 and 400, there are some who love to go higher. The eDPI setting of a mouse is unique to every player because different people are comfortable with different levels of sensitivity when it comes to a mouse.

The majority of pros use 400 DPI and between 1.5 and 2.0 in-game sensitivity.

TenZ currently uses the Logitech G Pro X Superlight, here are his settings: DPI - 800. In-game Sensitivity - 0.4 / 0.408. eDPI - 320 / 326.4.

Generally for FPS like CS and Valo low sense is good since the correction of spray and crosshair is easier in that way and if you're at 800-1000 DPI a range of 0.3-0.5 should be good.

Notable pro and streamer DPI and sensitivity settings

You'll see that most pros have a DPI between 400-800 where all gaming mice are going to track perfectly.

TenZ has traditionally changed his DPI regularly and has always been higher than average. However, he's changed this strategy and is now opting for lower sens and sticking with it. His eDPI of 240 is a lot lower than he has played with in the past, with his eDPI range usually falling between 300 and 350.

Then a lower sensitivity might be better for you. It will allow you to be more precise in aiming, as the odds of flicking over a small model will be dampened. Opposite that is of course the player who always runs in.

What is the best Val Sens for 800 DPI?

We recommend anything between 0.35 and 0.45.

Basic Controls. Getting the best sensitivity is really up to you and your preferences. We recommend starting around 6 and messing around with it until you find the perfect sensitivity. And we highly recommend the Tactical Button Layout Preset as it binds your crouch/slide button to the right thumbstick.

DPI: 800. EDPI: 309,5. Sensitivity: 0.387.

So let's check Tenz mouse settings: DPI: 800. EDPI: 240. Sensitivity: 0.485.

The optimal sensitivity for each DPI would be: 0.625 will be the best sensitivity in Valorant for 800 DPI. 0.5 Valorant sensitivity will be best for you if you have 1000 DPI. 0.416 sensitivity would be the best for Valorant players having 1200 DPI.

S1mple's in-game mouse settings:

DPI: 400. Game Sensitivity: 0.974.

Logitech B100 800 DPI Mouse.

The lower the DPI, this happens beacuse: Lower sensitivity will let you make smaller and more precise movements. Lower sensitivity will help reduce 'twitching' that you can't control. Lower sensitivity will help with accuracy.

Kinda weird that almost every pro uses 400 DPI, when it's scientifically proven that 800 DPI with half ingame sens, is more accurate (minimal difference).

What is the best Val Sens for 1200 DPI?

1200 DPI: Gamers using a 1200 DPI mouse should set their Valorant in-game sensitivity from 0.234 to 0.292 to be within the suggested eDPI range of 280 to 350.

From his monitor to his graphics card and motherboard, it's clear that TenZ is a fan of ASUS products. His PC is built to perfection, with the top-of-the-line Ryzen 9 and RTX 3090 standing out from the crowd to help run Valorant at 360 fps.

Shroud employs a DPI of 400, as previously established. It would be best to consider your in-game sensitivity while determining the importance of DPI. eDPI, or effective dots per inch, is the result of combining your DPI with in-game sensitivity.

It's better to have a higher sensitivity but not one that skips pixels, basically get it as high as you can go with complete precision and then use your arm to move the mouse instead of your wrist.

The standard DPI on a mouse is 400. However, the maximum amount of DPI varies from mouse to mouse. However, the majority of gamers prefer an 800 DPI. Some gamers prefer 1000 DPI, but we recommend that you avoid such high DPIs because they make controlling the mouse and your own movements extremely difficult.

For shooting precision in FPS, the recommended DPI for gaming is in the lower scope of 400-800.

Finding the Best VALORANT Sensitivity

But when in doubt, increments of 400 are ideal, with 800 and 1200 being good starting points. Note that the best DPI for VALORANT isn't necessarily super high.

Pro players use lower Valorant sensitivity settings because the wrist is far less accurate than the whole arm. Lower sensitivities allow you to use your whole arm and make more extensive and more comfortable strokes at higher accuracy.

Less visual clutter and detail removes distractions and provides greater contrast and visibility of targets compared to the environment. Spotting an enemy first, being able to discern and visually track a target and detecting movement are integral to high level play.

How do I find the best Sens for Val?

A guide to find the perfect sensitivity in Valorant. A low eDPI value can be achieved in two ways: Setting the in-game aim sensitivity to a moderately high value while keeping the mouse DPI low. Setting the in-game aim sensitivity value to a low value while keeping the mouse DPI high.

I have done some research on DPI and wrist vs arm aiming and I have seen that overwhelmingly the best CSGO players typically favor around 400-800 DPI with arm aiming as the go to aiming type. I am the exact opposite of that, with a whopping 3750 DPI and I primarily use wrist aiming as my go to.

The Finalmouse Starlight Pro TenZ edition features another addition to the Starlight series in collaboration with Valorant sensation TenZ. So if you ever wondered what mouse TenZ uses, it's this one.

E6: A1 Competitive Overview

65h Play Time 115 Matches. Immortal 1. Immortal 137 ^RR. Rank#11,428.

TenZ uses a Shure SM7B microphone.

0.5 Valorant sensitivity will be best for you if you have 1000 DPI. 0.416 sensitivity would be the best for Valorant players having 1200 DPI. 0.277 Valorant sensitivity will be best for players having 1800 DPI.

The answer to your question is really simple, pro players use those settings because of microsoft, because of the intellimouse or the wheel mouse optical, those mice only could do 400dpi, and many pro players learned to play with those mice, so they got used to 400dpi.

What is a good Valorant eDPI?

What is a good eDPI for Valorant? It's recommend to stay within the 200-400 eDPI range as that is what most pro Valorant players use.

1600 dpi for fps games/fps shooters is better because of no pixel skipping and you are able to make better micro adjustment, its just more smooth.

Even though it comes down to personal preference, a higher DPI is better for gaming than a low DPI for several reasons. A higher DPI reduces your mouse's input lag and makes it more precise. After all, even if the benefits are small, in competitive games, every millimeter matters.

Low DPI affords you a positive in-game sensitivity which makes it easier to adjust your settings when switching between different shooters. As humans, we're also susceptible to involuntary twitches and micro adjustments.

For shooting precision in FPS, the recommended DPI for gaming is in the lower scope of 400-800.

Pros need to use low sensitivity for better weapon spray control and steady aim. But they have sacrifice quick flicks/fast turns. People with high sensitivity can do those fast turns and flicks but sacrifice their own aim. Why do console gamers think 30 FPS is acceptable?

What is this? So let's check Tenz mouse settings: DPI: 800. EDPI: 240.

Many professional players use high-DPI mice because they can be more precise. A high DPI mouse can detect even the slightest movements, this can be especially important in competitive gaming, where every little advantage can make a difference.

Most Used DPI in the Professional Scene

400 DPI at 53% users. 800 DPI at 37% users. DPI higher than 800 may result in an almost unnoticeable, more fluid movement. However, you don't necessarily want superfluid movement.

In Apex Legends a lot of pros have started switching to 1600 DPI because they found that their tracking and input lag was decreased when using this compared to 400/800.